York Error Code P0
IPM overcurrent protection
Error Code Summary
| Brand | York |
| Error Code | P0 |
| Meaning | IPM overcurrent protection |
| Cause | Inverter overcurrent |
| Recommended Action | Check compressor and inverter board |
How to Fix York Error P0
- 1
Power Cycle the Unit
Turn off the unit at the breaker, wait 5 minutes, then restore power. Some errors auto-clear after a restart.
- 2
Identify the Issue
Error P0 means: IPM overcurrent protection. The most common cause is: Inverter overcurrent.
- 3
Take Corrective Action
Check compressor and inverter board
- 4
Test the System
After completing repairs, run the system and monitor for the error code. If it recurs, the issue may require professional diagnosis.
Safety Notice
Always disconnect power before performing any electrical work. If you're not a certified HVAC technician, contact a qualified professional for repairs involving refrigerant, electrical components, or compressor work.
Frequently Asked Questions
What does York error code P0 mean?
York error code P0 indicates: IPM overcurrent protection. This is typically caused by: Inverter overcurrent.
How do I fix York error code P0?
To fix York error code P0: Check compressor and inverter board. If the error persists after these steps, contact a qualified HVAC technician.
Is York error code P0 serious?
Error code P0 (IPM overcurrent protection) should be addressed promptly to prevent further damage to your York system. Always turn off the unit if you notice unusual sounds, smells, or continued malfunction.