Rheem Error Code P5
Condenser coil high temperature protection
Error Code Summary
| Brand | Rheem |
| Error Code | P5 |
| Meaning | Condenser coil high temperature protection |
| Cause | Condenser coil temperature too high in cooling mode |
| Recommended Action | Clean condenser coil, check outdoor fan, verify refrigerant charge |
How to Fix Rheem Error P5
- 1
Power Cycle the Unit
Turn off the unit at the breaker, wait 5 minutes, then restore power. Some errors auto-clear after a restart.
- 2
Identify the Issue
Error P5 means: Condenser coil high temperature protection. The most common cause is: Condenser coil temperature too high in cooling mode.
- 3
Take Corrective Action
Clean condenser coil, check outdoor fan, verify refrigerant charge
- 4
Test the System
After completing repairs, run the system and monitor for the error code. If it recurs, the issue may require professional diagnosis.
Safety Notice
Always disconnect power before performing any electrical work. If you're not a certified HVAC technician, contact a qualified professional for repairs involving refrigerant, electrical components, or compressor work.
Frequently Asked Questions
What does Rheem error code P5 mean?
Rheem error code P5 indicates: Condenser coil high temperature protection. This is typically caused by: Condenser coil temperature too high in cooling mode.
How do I fix Rheem error code P5?
To fix Rheem error code P5: Clean condenser coil, check outdoor fan, verify refrigerant charge. If the error persists after these steps, contact a qualified HVAC technician.
Is Rheem error code P5 serious?
Error code P5 (Condenser coil high temperature protection) should be addressed promptly to prevent further damage to your Rheem system. Always turn off the unit if you notice unusual sounds, smells, or continued malfunction.