Rheem Error Code 83
Condenser coil temperature fault
Error Code Summary
| Brand | Rheem |
| Error Code | 83 |
| Meaning | Condenser coil temperature fault |
| Cause | Condenser sensor reading abnormal |
| Recommended Action | Check sensor placement, measure resistance, replace if out of range |
How to Fix Rheem Error 83
- 1
Power Cycle the Unit
Turn off the unit at the breaker, wait 5 minutes, then restore power. Some errors auto-clear after a restart.
- 2
Identify the Issue
Error 83 means: Condenser coil temperature fault. The most common cause is: Condenser sensor reading abnormal.
- 3
Take Corrective Action
Check sensor placement, measure resistance, replace if out of range
- 4
Test the System
After completing repairs, run the system and monitor for the error code. If it recurs, the issue may require professional diagnosis.
Safety Notice
Always disconnect power before performing any electrical work. If you're not a certified HVAC technician, contact a qualified professional for repairs involving refrigerant, electrical components, or compressor work.
Frequently Asked Questions
What does Rheem error code 83 mean?
Rheem error code 83 indicates: Condenser coil temperature fault. This is typically caused by: Condenser sensor reading abnormal.
How do I fix Rheem error code 83?
To fix Rheem error code 83: Check sensor placement, measure resistance, replace if out of range. If the error persists after these steps, contact a qualified HVAC technician.
Is Rheem error code 83 serious?
Error code 83 (Condenser coil temperature fault) should be addressed promptly to prevent further damage to your Rheem system. Always turn off the unit if you notice unusual sounds, smells, or continued malfunction.