Mitsubishi Heavy Industries Error Code E60
Compressor position detection error
Error Code Summary
| Brand | Mitsubishi Heavy Industries |
| Error Code | E60 |
| Meaning | Compressor position detection error |
| Cause | Rotor position sensor fault |
| Recommended Action | Check compressor, inverter board |
How to Fix Mitsubishi Heavy Industries Error E60
- 1
Power Cycle the Unit
Turn off the unit at the breaker, wait 5 minutes, then restore power. Some errors auto-clear after a restart.
- 2
Identify the Issue
Error E60 means: Compressor position detection error. The most common cause is: Rotor position sensor fault.
- 3
Take Corrective Action
Check compressor, inverter board
- 4
Test the System
After completing repairs, run the system and monitor for the error code. If it recurs, the issue may require professional diagnosis.
Safety Notice
Always disconnect power before performing any electrical work. If you're not a certified HVAC technician, contact a qualified professional for repairs involving refrigerant, electrical components, or compressor work.
Frequently Asked Questions
What does Mitsubishi Heavy Industries error code E60 mean?
Mitsubishi Heavy Industries error code E60 indicates: Compressor position detection error. This is typically caused by: Rotor position sensor fault.
How do I fix Mitsubishi Heavy Industries error code E60?
To fix Mitsubishi Heavy Industries error code E60: Check compressor, inverter board. If the error persists after these steps, contact a qualified HVAC technician.
Is Mitsubishi Heavy Industries error code E60 serious?
Error code E60 (Compressor position detection error) should be addressed promptly to prevent further damage to your Mitsubishi Heavy Industries system. Always turn off the unit if you notice unusual sounds, smells, or continued malfunction.