Mitsubishi Heavy Industries Error Code E35
Heat exchanger temperature high
Error Code Summary
| Brand | Mitsubishi Heavy Industries |
| Error Code | E35 |
| Meaning | Heat exchanger temperature high |
| Cause | Condenser overheat |
| Recommended Action | Clean condenser, check fan operation |
How to Fix Mitsubishi Heavy Industries Error E35
- 1
Power Cycle the Unit
Turn off the unit at the breaker, wait 5 minutes, then restore power. Some errors auto-clear after a restart.
- 2
Identify the Issue
Error E35 means: Heat exchanger temperature high. The most common cause is: Condenser overheat.
- 3
Take Corrective Action
Clean condenser, check fan operation
- 4
Test the System
After completing repairs, run the system and monitor for the error code. If it recurs, the issue may require professional diagnosis.
Safety Notice
Always disconnect power before performing any electrical work. If you're not a certified HVAC technician, contact a qualified professional for repairs involving refrigerant, electrical components, or compressor work.
Frequently Asked Questions
What does Mitsubishi Heavy Industries error code E35 mean?
Mitsubishi Heavy Industries error code E35 indicates: Heat exchanger temperature high. This is typically caused by: Condenser overheat.
How do I fix Mitsubishi Heavy Industries error code E35?
To fix Mitsubishi Heavy Industries error code E35: Clean condenser, check fan operation. If the error persists after these steps, contact a qualified HVAC technician.
Is Mitsubishi Heavy Industries error code E35 serious?
Error code E35 (Heat exchanger temperature high) should be addressed promptly to prevent further damage to your Mitsubishi Heavy Industries system. Always turn off the unit if you notice unusual sounds, smells, or continued malfunction.