Hisense Error Code P4
Inverter drive error
Error Code Summary
| Brand | Hisense |
| Error Code | P4 |
| Meaning | Inverter drive error |
| Cause | Drive board fault |
| Recommended Action | Check inverter drive board |
How to Fix Hisense Error P4
- 1
Power Cycle the Unit
Turn off the unit at the breaker, wait 5 minutes, then restore power. Some errors auto-clear after a restart.
- 2
Identify the Issue
Error P4 means: Inverter drive error. The most common cause is: Drive board fault.
- 3
Take Corrective Action
Check inverter drive board
- 4
Test the System
After completing repairs, run the system and monitor for the error code. If it recurs, the issue may require professional diagnosis.
Safety Notice
Always disconnect power before performing any electrical work. If you're not a certified HVAC technician, contact a qualified professional for repairs involving refrigerant, electrical components, or compressor work.
Frequently Asked Questions
What does Hisense error code P4 mean?
Hisense error code P4 indicates: Inverter drive error. This is typically caused by: Drive board fault.
How do I fix Hisense error code P4?
To fix Hisense error code P4: Check inverter drive board. If the error persists after these steps, contact a qualified HVAC technician.
Is Hisense error code P4 serious?
Error code P4 (Inverter drive error) should be addressed promptly to prevent further damage to your Hisense system. Always turn off the unit if you notice unusual sounds, smells, or continued malfunction.