Danfoss
SH295A4ALC
Scroll Compressor • R410A
Quick Stats
Capacity
295,000 BTU/h
Power
86,454 W (~115.89 HP)
Refrigerant
R410A
Type
Scroll
Application
AC/Heat Pump
Technical Specifications
Performance
| Cooling Capacity | 295,000 BTU/h |
| Cooling Capacity (W) | 86,454 W |
| Displacement | 296 cc |
| Application | AC/Heat Pump |
Electrical
| Voltage | 380-415V/50Hz |
| Phase | 3-Phase |
| RLA (Running Load Amps) | 55 A |
| LRA (Locked Rotor Amps) | 330 A |
Physical
| Weight | 135 kg |
| Oil Charge | 4800 cc |
| Oil Type | POE |
Refrigerant
| Primary Refrigerant | R410A |
| Compressor Type | Scroll |
Oil Compatibility & Lubrication
Oil Specifications
| Required Oil Type | POE |
| Full Name | Polyol Ester (POE) |
| Viscosity Grades | ISO VG 32, 46, 68 |
| Recommended | ISO VG 32-46 |
| Factory Charge | 4800 cc |
Compatible Oil Brands
- Emkarate RL32-3MAF
- Copeland 3GS
- Bitzer BSE32
Important Warnings for R410A
- • POE oil is highly hygroscopic - keep sealed
- • Never mix with mineral oil
- • Use dedicated recovery equipment
Oil Return: High velocity in vertical risers required due to high operating pressure
General Oil Guidelines
!
Never mix MO (Mineral) and POE oils - causes chemical breakdown
💧
POE absorbs moisture - keep container sealed, minimize air exposure
✓
Check oil level through sight glass after 24 hours of operation
Installation Guidelines
1
Ensure the system is properly evacuated before charging with R410A refrigerant.
2
Use POE oil only. Oil charge: 4800 cc.
3
Breaker size recommendation: 69 A minimum (based on RLA × 1.25).
4
Wire size should be rated for 55 A continuous load at 380-415V/50Hz.
Recommended Accessories
Start Capacitor
For high starting torque applications
Run Capacitor
Improves efficiency and power factor
Overload Protector
Thermal protection for motor
Start Relay
PTC or current relay for motor starting
Manufacturer Information
Brand: Danfoss
Country: Denmark